EMC
Accura
Airtec
Aignep
Mecair
Mütec
Bürkert
FineTek
Pneumax
ROSS Controls
Master Pneumatic
SmartMeasurement
Control Concepts
DAZIC — PROX-MICRO INDUCTIVE PROXIMITY SWITCH
DAZIC Inductive Proximity Switch
- Cable: 500 Hz, 6′ (1.83 m)
- 0-30 VDC NPN M18mm Shielded N.O.
-
Powder-coated cast aluminum housing with Lexan™ cover
-
Non-contact sensing – not directly coupled to a shaft
- 0.315″ (8.0 mm) sensing distance
- Will pick up any ferrous material — magnet not required
Contact us Tel: 02-384-6060 Email: info@factocomponents.co.th
Technical Specification DAZIC® — PROX-MICRO INDUCTIVE PROXIMITY SWITCH
Micro-Controlled, Field-Ajustable, and Multi-Setpoint Speed Monitor)
DAZIC® The PROX-MICRO Proximity Switch is a non-contacting speed sensing device which converts pulses from a ferrous target to an electrical signal. The speed monitor utilizes a microcontroller and proprietary internal software to precisely monitor the RPM rate of the rotating ferrous target(s). Time between pulses is com.
The PROX-MICRO is packaged in a NEMA 4/5 enclosure with a transparent Lexan™ cover for dust and moisture protection.
Features:
- Under Speed monitoring: 20-99% of running speed
- Easy to program and field adjustable
- Status and Relay indicating LEDs
- Non-contact sensing – not directly coupled to a shaft
- Powder-coated cast aluminum housing with Lexan™ cover
- Large Sensing Range:
- 6 – 30,000 RPM based on 1 pulse per revolution
- 1 – 7,500 RPM based on 4 pulses per revolution
- 0.1 – 3000 RPM based on 60 pulses per revolution
- Proximity Sensor Features:
- 500 Hz, 6′ (1.83 m) Cable
- 0.315″ (8.0 mm) Sensing Distance
- 10-30 VDC NPN M18mm Shielded N.O.
- Will pick up any ferrous material — magnet not required
PROX-MICRO Specifications |
|
| Conduit Entry | Power/signal wires: 1/2″ NPT PROX wire: 3/8″ |
| Input Voltage | 85~305 VAC 50/60 Hz |
| Supply Current | 110 mA maximum / 1 watt |
| Output | Single Pole 10-A SPDT Relay 250 VAC |
| Frequency Range | Controller: 0.1 Hz to 500 Hz Sensor: 500 Hz |
| Memory | Nonvolatile, 10-year retention |
| Temperature | -40° to +158° F (-40° to +70° C) |
| Inductive Sensor | 3/4” opening required |
| Status LED | Input Pulse / Alarm Indication (blink rate change) Temperature Range |
| Start-up Delay (SDLY) | 0 to 2 minutes |
| Alarm Delay (ADLY) | 0 to 1 minute |
| Accuracy | +/- 1% of calibrated set point |
| Output Relay | Single Pole, Double Throw (SPDT), 10 Amp @250 VAC, or 30 VDC/Resistive Load |
| Power Consumption | 4 Watt (0.35 Amp @ 120 VAC) |
| Speed Range | 0.1 Hz – 500 Hz (dependent upon pulses per 1 rotation |
PROX-MICRO Dimensional Drawings
02-384-6060 info@factocomponents.co.th www.factocomponents.co.th
Related products
Process & Control Valves
Process & Control Valves
Process & Control Valves
Process & Control Valves
Process & Control Valves