Technical Specification | DAZIC® — 4100 SERIES ZERO SPEED SWITCH
DESIGNED FOR SYSTEMS THAT HAVE A MODERATE TO HIGH RPM~
DAZIC® Zero Speed Switches monitor the rotary motion of equipment when interlocked as part of a conveyor system, or other shaft-driven process components. The switches ensure that if one machine deviates or fails, the switch will:
- For shaft input speeds of 4 to 1800 RPM.
- Will operate in temperatures ranging from -40° F to +250° F (-40° C to +482° C).
- NEMA 4/4X housings are painted with an epoxy-based powder coat to provide corrosion resistance as well as protection against dust, rain and hose-directed water.
Explosion-proof Zero Speed Switch is available with NEMA 7/9 rating. Contact us for more information.
4100 Series |
|
Driver | V-belt, Roller wheel, Chain drive or Sprocket |
Shaft Diameter | 1/2″ (1.27 cm) |
Operating Range | 4 to 1,800 RPM |
Driver Torque Required | .0208 ft-lb (4 in-oz) (.0282 Nm) |
Temperature Tolerance | -40°F to +250°F (-40°C to +121°C) |
Housing Options | Aluminum (AL) or Cast Iron (CI) |
NEMA Rating | 4/4x |
Mounting Options | Base Mount |
Dimensions (L x W x H) | 6.95″ x 4.25″ x 3.93″
(17.65 cm x 10.80 cm x 9.98 cm) |
Wiring Contact Options | SPDT, DPDT, SPDT(2) |
Weight | AL – 4 lbs. (1.81 kg)
CI – 8 lbs. (3.63 kg) |
When driven from a critical shaft, a Zero Speed Switch will engage when a system’s normal operating speed:
- Reverses rotation
- Begins to overspeed
- Stops due to mechanical failure
- Slows down due to overload
Speed Switch devices coupled to a corresponding shaft, must be properly mounted and aligned to avoid putting extra load on motor bearings, which may cause premature failure. The use of installation accessories such as Mounting Brackets and K-Couplings provide a secure foundation and eliminate misalignment connection problems.
Mounting Styles:
Switches can be mounted in any position, but they must be aligned and concentric with the corresponding drive shaft.
- Type B – Base Mount
- Type F – Flange Mount
- Type FK – Flange Mount w/ pilot
Electrical Wiring Options:
DPDT
Double Pole, Double Throw
SPDT
Single Pole, Double Throw
SPDT(2)
Direction Indicating
Mounting Bracket:
Mounting Bracket |
Applicable Speed Switch Models |
MB-1* | 2100 Series 4100 Series 8100 Series |
MB-2 | 2100-EP Series 8100-EP Series RotoGuard® Models |
Model MB-1 for Zero Speed Switch series 4100
K-Couplings:
The K-Coupling® is made of double-loop ELASTACAST® polyurethane elastomeric material assembled to zinc plated steel hubs, which mount to shafts using
Allen screws. Motor noise and vibration will be dampened. Bearings will last longer and require less maintenance.
-
Bore tolerances are AGMA Class 2 – 000 + .002
-
All standard coupling hubs are zinc plated steel
- Standard Keyways
- 1/8″ for 1/2″ dia.
- 3/16″ for 9/16″ and 5/8″ dia. shafts
- Keyways may be obtained on Series 5803 and 5804 couplings for an additional cost.
Available Bore Sizes |
Series 5801 |
Series 5802 |
Series 5803 |
Series 5804 |
3/16″ (4.76 mm) | ||||
1/4″ (6.35 mm) | ||||
5/16″ (7.94 mm) | ||||
3/8″ (9.53 mm) | ||||
7/16″ (11.11 mm) | ||||
1/2″ (12.70 mm) | ||||
9/16″ (14.29 mm) | ||||
5/8″ (15.88 mm) | ||||
Torque Capacity |
0.25 ft-lb (0.34 Nm) |
1.0 ft-lb (1.36 Nm) |
2.33 ft-lb (3.16 Nm) |
3.33 ft-lb (4.51 Nm) |
Maximum Misalignment |
10° Angular 3/32″ Parallel |
15° Angular 1/8″ Parallel |
15° Angular 3/16″ Parallel |
15° Angular 1/8″ Parallel |
Stub Shaft:
Part No. | Shaft Diameter (A) | Thread Size (B) |
STSH-500 |
1/2″ (12.70 mm) | 1/2-13 UNC-2A |
STSH-625 |
5/8″ (15.88 mm) | 5/8-11 UNC-2A |
*Stub Shaft includes one Jam Nut
02-384-6060 info@factocomponents.co.th www.factocomponents.co.th